Bootloader: Search framebuffer information from kernel memory

Framebuffer information is no longer hard coded into bootloader.
Kernel can define framebuffer info structure in its memory which is
used for finding proper video mode.

bootloader/bios/boot.S

@@ -60,11 +60,6 @@ stage2_main:
 	call get_memory_map
 	call read_user_command_line
 
-	movw $800, %ax
-	movw $600, %bx
-	movb $32,  %cl
-	call vesa_find_video_mode
-
 	call print_newline
 
 	movw $start_kernel_load_msg, %si
@@ -87,7 +82,7 @@ stage2_main:
 
 	call elf_read_kernel_to_memory
 
-	call vesa_set_target_mode
+	call vesa_set_video_mode
 
 	cli
 

bootloader/bios/framebuffer.S

@@ -1,14 +1,65 @@
 .code16
 .section .stage2
 
-# Find suitable video mode (argument registers not saved)
+# kernel framebuffer information format
+#	.align 8
+#	.long 0xBABAB007
+#	.long -(0xBABAB007 + width + height + bpp)
+#	.long width		(2 bytes used, 4 bytes for ease of calculation)
+#	.long height	(2 bytes used, 4 bytes for ease of calculation)
+#	.long bpp		(1 bytes used, 4 bytes for ease of calculation)
+
+# scan memory 0x100000 -> 0x200000 for framebuffer information
+# return:
 #	ax: target width
 #	bx: target height
-#	cl: target bpp
+#	cx: target bpp
-# return:
+vesa_scan_kernel_image:
-#	ax: video mode number if found, 0 otherwise
+	pushl %edx
-.global vesa_find_video_mode
+	pushl %esi
+
+	movl $0x100000, %esi
+
+ .vesa_scan_kernel_image_loop:
+	# check magic
+	cmpl $0xBABAB007, (%esi)
+	jne .vesa_scan_kernel_image_next_addr
+
+	# check checksum
+	movl 0x00(%esi), %edx
+	addl 0x04(%esi), %edx
+	addl 0x08(%esi), %edx
+	addl 0x0C(%esi), %edx
+	addl 0x10(%esi), %edx
+	testl %edx, %edx
+	jnz .vesa_scan_kernel_image_next_addr
+
+	# set return registers
+	movw 0x08(%esi), %ax
+	movw 0x0C(%esi), %bx
+	movw 0x10(%esi), %cx
+	jmp .vesa_scan_kernel_image_done
+
+ .vesa_scan_kernel_image_next_addr:
+	addl $8, %esi
+	cmpl $0x200000, %esi
+	jb .vesa_scan_kernel_image_loop
+
+	# zero out return registers
+	xorw %ax, %ax
+	xorw %bx, %bx
+	xorw %cx, %cx
+
+ .vesa_scan_kernel_image_done:
+	popl %esi
+	popl %edx
+	ret
+
+# Find suitable video mode and save it in (vesa_target_mode)
 vesa_find_video_mode:
+	pushw %ax
+	pushw %bx
+	pushw %cx
 	pushw %di
 	pushl %esi
 
@@ -16,13 +67,6 @@ vesa_find_video_mode:
 	movl %esp, %ebp
 	subl $6, %esp
 
-	# save arguments in stack
-	movw %ax, -2(%ebp)
-	movw %bx, -4(%ebp)
-
-	andw $0xFF, %cx
-	movw %cx, -6(%ebp)
-
 	# clear target mode and frame buffer
 	movw $0, (vesa_target_mode)
 	movl $0, (framebuffer + 0)
@@ -31,6 +75,15 @@ vesa_find_video_mode:
 	movl $0, (framebuffer + 12)
 	movw $0, (framebuffer + 16)
 
+	call vesa_scan_kernel_image
+	testw %ax, %ax
+	jz .vesa_find_video_mode_loop_modes_done
+
+	# save arguments in stack
+	movw %ax, -2(%ebp)
+	movw %bx, -4(%ebp)
+	movw %cx, -6(%ebp)
+
 	# get vesa information
 	movw $0x4F00, %ax
 	movw $vesa_info_buffer, %di
@@ -72,18 +125,18 @@ vesa_find_video_mode:
 	movb -6(%ebp), %al; cmpb %al, (vesa_mode_info_buffer + 0x19)
 	jne .vesa_find_video_mode_next_mode
 
+	# set address, pitch, type
 	movl (vesa_mode_info_buffer + 0x28), %esi
 	movl %esi, (framebuffer + 0)
 	movw (vesa_mode_info_buffer + 0x10), %ax
 	movw %ax,  (framebuffer + 4)
+	movb $1,   (framebuffer + 17)
 
-	xorl %eax, %eax
+	# set width, height, bpp
 	movw -2(%ebp), %ax; movw %ax, (framebuffer +  8)
 	movw -4(%ebp), %ax; movw %ax, (framebuffer + 12)
 	movw -6(%ebp), %ax; movb %al, (framebuffer + 16)
 
-	movb $1,				(framebuffer + 17)
-
 	movw %cx, (vesa_target_mode)
 	jmp .vesa_find_video_mode_loop_modes_done
 
@@ -95,6 +148,9 @@ vesa_find_video_mode:
 	leavel
 	popl %esi
 	popw %di
+	popw %cx
+	popw %bx
+	popw %ax
 	ret
 
  .vesa_unsupported:
@@ -108,13 +164,16 @@ vesa_find_video_mode:
 	jmp print_and_halt
 
 
-# set mode found from vesa_find_video_mode. if no mode
+# scan for video mode in kernel memory and set the correct one.
-# was found, set it to 80x25 text mode to clear the screen.
+# when video mode is not found or does not exists,
-.global vesa_set_target_mode
+# set it to 80x25 text mode to clear the screen.
-vesa_set_target_mode:
+.global vesa_set_video_mode
+vesa_set_video_mode:
 	pushw %ax
 	pushw %bx
 
+	call vesa_find_video_mode
+
 	movw (vesa_target_mode), %bx
 	testw %bx, %bx
 	jz .vesa_set_target_mode_generic