BuildSystem: add cmake variable UEFI_BOOT

If this variable is defined in cmake, image will be build with esp
and booted with uefi.

.gitignore

@@ -5,4 +5,5 @@ base/
 *.tar.*
 toolchain/*/
 
+!toolchain/local/
 !base-sysroot.tar.gz

CMakeLists.txt

@@ -22,6 +22,10 @@ if(DEFINED QEMU_ACCEL)
 	set(QEMU_ACCEL -accel ${QEMU_ACCEL})
 endif()
 
+if(DEFINED UEFI_BOOT)
+	set(UEFI_BOOT 1)
+endif()
+
 add_compile_options(-mno-sse -mno-sse2)
 add_compile_definitions(__enable_sse=0)
 
@@ -67,7 +71,7 @@ add_custom_target(libstdc++
 )
 
 add_custom_target(image
-	COMMAND ${CMAKE_COMMAND} -E env SYSROOT="${BANAN_SYSROOT}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" ${CMAKE_SOURCE_DIR}/image.sh
+	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" SYSROOT="${BANAN_SYSROOT}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" TOOLCHAIN="${TOOLCHAIN_PREFIX}" UEFI_BOOT="${UEFI_BOOT}" ${CMAKE_SOURCE_DIR}/image.sh
 	DEPENDS kernel-install
 	DEPENDS ban-install
 	DEPENDS libc-install
@@ -77,7 +81,7 @@ add_custom_target(image
 )
 
 add_custom_target(image-full
-	COMMAND ${CMAKE_COMMAND} -E env SYSROOT="${BANAN_SYSROOT}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" ${CMAKE_SOURCE_DIR}/image-full.sh
+	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" SYSROOT="${BANAN_SYSROOT}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" TOOLCHAIN="${TOOLCHAIN_PREFIX}" UEFI_BOOT="${UEFI_BOOT}" ${CMAKE_SOURCE_DIR}/image-full.sh
 	DEPENDS kernel-install
 	DEPENDS ban-install
 	DEPENDS libc-install
@@ -92,19 +96,19 @@ add_custom_target(check-fs
 )
 
 add_custom_target(qemu
-	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" ${CMAKE_SOURCE_DIR}/qemu.sh -serial stdio ${QEMU_ACCEL}
+	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" UEFI_BOOT="${UEFI_BOOT}" ${CMAKE_SOURCE_DIR}/qemu.sh -serial stdio ${QEMU_ACCEL}
 	DEPENDS image
 	USES_TERMINAL
 )
 
 add_custom_target(qemu-nographic
-	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" ${CMAKE_SOURCE_DIR}/qemu.sh -nographic ${QEMU_ACCEL}
+	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" UEFI_BOOT="${UEFI_BOOT}" ${CMAKE_SOURCE_DIR}/qemu.sh -nographic ${QEMU_ACCEL}
 	DEPENDS image
 	USES_TERMINAL
 )
 
 add_custom_target(qemu-debug
-	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" ${CMAKE_SOURCE_DIR}/qemu.sh -serial stdio -d int -no-reboot
+	COMMAND ${CMAKE_COMMAND} -E env BANAN_ARCH="${BANAN_ARCH}" DISK_IMAGE_PATH="${DISK_IMAGE_PATH}" UEFI_BOOT="${UEFI_BOOT}" ${CMAKE_SOURCE_DIR}/qemu.sh -serial stdio -d int -no-reboot
 	DEPENDS image
 	USES_TERMINAL
 )

image-full.sh

@@ -4,18 +4,38 @@ set -e
 DISK_SIZE=$[50 * 1024 * 1024]
 MOUNT_DIR=/mnt
 
-truncate -s 0 $DISK_IMAGE_PATH
+truncate -s 0 "$DISK_IMAGE_PATH"
-truncate -s $DISK_SIZE $DISK_IMAGE_PATH
+truncate -s $DISK_SIZE "$DISK_IMAGE_PATH"
 
-sed -e 's/\s*\([-\+[:alnum:]]*\).*/\1/' << EOF | fdisk $DISK_IMAGE_PATH > /dev/null
+if [ "$UEFI_BOOT" == "1" ]; then
+	sed -e 's/\s*\([-\+[:alnum:]]*\).*/\1/' << EOF | fdisk "$DISK_IMAGE_PATH" > /dev/null
 	  g     # gpt
 	  n     # new partition
 	  1     # partition number 1
 	        # default (from the beginning of the disk)
-  +1MiB # bios boot partiton size
+	  +16M  # efi system size
 	  n     # new partition
 	  2     # partition number 2
-        # default (right after bios boot partition)
+	        # default (right after efi system partition)
+			# default (to the end of disk)
+	  t     # set type
+	  1     # ... of partition 1
+	  1     # efi system
+	  t     # set type
+	  2     # ... of partition 2
+	  20    # Linux filesystem
+	  w     # write changes
+EOF
+else
+	sed -e 's/\s*\([-\+[:alnum:]]*\).*/\1/' << EOF | fdisk "$DISK_IMAGE_PATH" > /dev/null
+	  g     # gpt
+	  n     # new partition
+	  1     # partition number 1
+	        # default (from the beginning of the disk)
+	  +1M   # bios boot partition size
+	  n     # new partition
+	  2     # partition number 2
+	        # default (right after bios partition)
 			# default (to the end of disk)
 	  t     # set type
 	  1     # ... of partition 1
@@ -25,8 +45,9 @@ sed -e 's/\s*\([-\+[:alnum:]]*\).*/\1/' << EOF | fdisk $DISK_IMAGE_PATH > /dev/n
 	  20    # Linux filesystem
 	  w     # write changes
 EOF
+fi
 
-LOOP_DEV=$(sudo losetup -f --show $DISK_IMAGE_PATH)
+LOOP_DEV=$(sudo losetup -f --show "$DISK_IMAGE_PATH")
 sudo partprobe $LOOP_DEV
 
 PARTITION1=${LOOP_DEV}p1
@@ -34,8 +55,23 @@ PARTITION2=${LOOP_DEV}p2
 
 sudo mkfs.ext2 -d $SYSROOT -b 1024 -q $PARTITION2
 
-sudo mount $PARTITION2 $MOUNT_DIR
+if [[ "$UEFI_BOOT" == "1" ]]; then
-sudo grub-install --no-floppy --target=i386-pc --modules="normal ext2 multiboot" --boot-directory=${MOUNT_DIR}/boot $LOOP_DEV
+	sudo mkfs.fat $PARTITION1 > /dev/null
-sudo umount $MOUNT_DIR
+	sudo mount $PARTITION1 "$MOUNT_DIR"
+	sudo mkdir -p "$MOUNT_DIR/EFI/BOOT"
+	sudo "$TOOLCHAIN/bin/grub-mkstandalone" -O "$BANAN_ARCH-efi" -o "$MOUNT_DIR/EFI/BOOT/BOOTX64.EFI" "boot/grub/grub.cfg=$TOOLCHAIN/grub-memdisk.cfg"
+	sudo umount "$MOUNT_DIR"
+
+	sudo mount $PARTITION2 "$MOUNT_DIR"
+	sudo mkdir -p "$MOUNT_DIR/boot/grub"
+	sudo cp "$TOOLCHAIN/grub-uefi.cfg" "$MOUNT_DIR/boot/grub/grub.cfg"
+	sudo umount "$MOUNT_DIR"
+else
+	sudo mount $PARTITION2 "$MOUNT_DIR"
+	sudo grub-install --no-floppy --target=i386-pc --modules="normal ext2 multiboot" --boot-directory="$MOUNT_DIR/boot" $LOOP_DEV
+	sudo mkdir -p "$MOUNT_DIR/boot/grub"
+	sudo cp "$TOOLCHAIN/grub-legacy-boot.cfg" "$MOUNT_DIR/boot/grub/grub.cfg"
+	sudo umount "$MOUNT_DIR"
+fi
 
 sudo losetup -d $LOOP_DEV

image.sh

@@ -1,11 +1,19 @@
 #!/bin/bash
-set -e
 
 if [ ! -f $DISK_IMAGE_PATH ]; then
 	$(dirname "$0")/image-full.sh
 	exit 0
 fi
 
+fdisk -l $DISK_IMAGE_PATH | grep -q 'EFI System'; IMAGE_IS_UEFI=$?
+[[ $UEFI_BOOT == 1 ]]; CREATE_IS_UEFI=$?
+
+if [ $IMAGE_IS_UEFI -ne $CREATE_IS_UEFI ]; then
+	echo Converting disk image to/from UEFI
+	$(dirname "$0")/image-full.sh
+	exit 0
+fi
+
 MOUNT_DIR=/mnt
 
 LOOP_DEV=$(sudo losetup -f --show $DISK_IMAGE_PATH)

qemu.sh

@@ -1,9 +1,18 @@
 #!/bin/bash
 set -e
 
+if [ -z ${OVMF_PATH+x} ]; then
+	OVMF_PATH="/usr/share/ovmf/x64/OVMF.fd"
+fi
+
+if [ "$UEFI_BOOT" == "1" ]; then
+	BIOS_ARGS="-bios $OVMF_PATH -net none"
+fi
+
 qemu-system-$BANAN_ARCH											\
 	-m 128														\
 	-smp 2														\
+	$BIOS_ARGS													\
 	-drive format=raw,id=disk,file=${DISK_IMAGE_PATH},if=none	\
 	-device ahci,id=ahci										\
 	-device ide-hd,drive=disk,bus=ahci.0						\

toolchain/local/grub-legacy-boot.cfg

@@ -0,0 +1,23 @@
+menuentry "banan-os" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2
+}
+
+menuentry "banan-os (no serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noserial
+}
+
+menuentry "banan-os (only serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 console=ttyS0
+}
+
+menuentry "banan-os (no apic)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic
+}
+
+menuentry "banan-os (no apic, no serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic noserial
+}
+
+menuentry "banan-os (no apic, only serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic console=ttyS0
+}

toolchain/local/grub-memdisk.cfg

@@ -0,0 +1,2 @@
+insmod part_gpt
+configfile (hd0,gpt2)/boot/grub/grub.cfg

toolchain/local/grub-uefi.cfg

@@ -0,0 +1,26 @@
+insmod part_gpt
+set root=(hd0,gpt2)
+
+menuentry "banan-os" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2
+}
+
+menuentry "banan-os (no serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noserial
+}
+
+menuentry "banan-os (only serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 console=ttyS0
+}
+
+menuentry "banan-os (no apic)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic
+}
+
+menuentry "banan-os (no apic, no serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic noserial
+}
+
+menuentry "banan-os (no apic, only serial)" {
+	multiboot /boot/banan-os.kernel root=/dev/sda2 noapic console=ttyS0
+}