Kernel: Use local labels in assembly

kernel/arch/x86_64/Syscall.S

@@ -33,13 +33,13 @@ sys_fork_trampoline:
 
 	call read_ip
 	testq %rax, %rax
-	jz .done
+	jz .Lsys_fork_trampoline_done
 
 	movq %rax, %rsi
 	movq %rsp, %rdi
 	call sys_fork
 
- .done:
+ .Lsys_fork_trampoline_done:
 	popq %r15
 	popq %r14
 	popq %r13

kernel/arch/x86_64/User.S

@@ -20,28 +20,28 @@ safe_user_strncpy:
 	testq %rcx, %rcx
 	jz safe_user_strncpy_fault
 
- .safe_user_strncpy_align_loop:
+ .Lsafe_user_strncpy_align_loop:
 	testb $0x7, %sil
-	jz .safe_user_strncpy_align_done
+	jz .Lsafe_user_strncpy_align_done
 
 	movb (%rsi), %al
 	movb %al, (%rdi)
 	testb %al, %al
-	jz .safe_user_strncpy_done
+	jz .Lsafe_user_strncpy_done
 
 	incq %rdi
 	incq %rsi
 	decq %rcx
-	jnz .safe_user_strncpy_align_loop
+	jnz .Lsafe_user_strncpy_align_loop
 	jmp safe_user_strncpy_fault
 
- .safe_user_strncpy_align_done:
+ .Lsafe_user_strncpy_align_done:
 	movq $0x0101010101010101, %r8
 	movq $0x8080808080808080, %r9
 
- .safe_user_strncpy_qword_loop:
+ .Lsafe_user_strncpy_qword_loop:
 	cmpq $8, %rcx
-	jb .safe_user_strncpy_qword_done
+	jb .Lsafe_user_strncpy_qword_done
 
 	movq (%rsi), %rax
 	movq %rax, %r10
@@ -52,36 +52,36 @@ safe_user_strncpy:
 	notq %r11
 	andq %r11, %r10
 	andq %r9, %r10
-	jnz .safe_user_strncpy_byte_loop
+	jnz .Lsafe_user_strncpy_byte_loop
 
 	movq %rax, (%rdi)
 
 	addq $8, %rdi
 	addq $8, %rsi
 	subq $8, %rcx
-	jnz .safe_user_strncpy_qword_loop
+	jnz .Lsafe_user_strncpy_qword_loop
 	jmp safe_user_strncpy_fault
 
- .safe_user_strncpy_qword_done:
+ .Lsafe_user_strncpy_qword_done:
 	testq %rcx, %rcx
 	jz safe_user_strncpy_fault
 
- .safe_user_strncpy_byte_loop:
+ .Lsafe_user_strncpy_byte_loop:
 	movb (%rsi), %al
 	movb %al, (%rdi)
 	testb %al, %al
-	jz .safe_user_strncpy_done
+	jz .Lsafe_user_strncpy_done
 
 	incq %rdi
 	incq %rsi
 	decq %rcx
-	jnz .safe_user_strncpy_byte_loop
+	jnz .Lsafe_user_strncpy_byte_loop
 
  safe_user_strncpy_fault:
 	xorq %rax, %rax
 	ret
 
- .safe_user_strncpy_done:
+ .Lsafe_user_strncpy_done:
 	movb $1, %al
 	ret
 safe_user_strncpy_end:

kernel/arch/x86_64/boot.S

@@ -161,12 +161,10 @@ is_64_bit:
 
 check_requirements:
 	call has_cpuid
-	jz .exit
+	jz system_halt
 	call is_64_bit
-	jz .exit
+	jz system_halt
 	ret
-.exit:
-	jmp system_halt
 
 enable_sse:
 	movl %cr0, %eax
@@ -226,10 +224,10 @@ _start:
 
 	# flush gdt and jump to 64 bit
 	lgdt V2P(boot_gdtr)
-	ljmpl $0x08, $V2P(long_mode)
+	ljmpl $0x08, $V2P(.Llong_mode)
 
 .code64
-long_mode:
+.Llong_mode:
 	movw $0x10, %ax
 	movw %ax, %ds
 	movw %ax, %ss
@@ -240,10 +238,10 @@ long_mode:
 	addq $KERNEL_OFFSET, %rsp
 
 	# jump to higher half
-	movabsq $higher_half, %rcx
+	movabsq $.Lhigher_half, %rcx
 	jmp *%rcx
 
-higher_half:
+.Lhigher_half:
 	# call global constuctors
 	call _init
 
@@ -293,18 +291,18 @@ ap_ready:
 	.skip 8
 
 1:	cli; cld
-	ljmpl $0x00, $AP_REL(ap_cs_clear)
+	ljmpl $0x00, $AP_REL(.Lap_cs_clear)
 
-ap_cs_clear:
+.Lap_cs_clear:
 	# load ap gdt and enter protected mode
 	lgdt AP_REL(ap_gdtr)
 	movl %cr0, %eax
 	orb $1, %al
 	movl %eax, %cr0
-	ljmpl $0x08, $AP_REL(ap_protected_mode)
+	ljmpl $0x08, $AP_REL(.Lap_protected_mode)
 
 .code32
-ap_protected_mode:
+.Lap_protected_mode:
 	movw $0x10, %ax
 	movw %ax, %ds
 	movw %ax, %ss
@@ -318,14 +316,14 @@ ap_protected_mode:
 
 	# load boot gdt and enter long mode
 	lgdt V2P(boot_gdtr)
-	ljmpl $0x08, $AP_REL(ap_long_mode)
+	ljmpl $0x08, $AP_REL(.Lap_long_mode)
 
 .code64
-ap_long_mode:
-	movq $ap_higher_half, %rax
+.Lap_long_mode:
+	movq $.Lap_higher_half, %rax
 	jmp *%rax
 
-ap_higher_half:
+.Lap_higher_half:
 	movq AP_REL(ap_prepare_paging), %rax
 	call *%rax